Extruder Indicator collection 2 for Bambu Lab A1 Series printers
Copyright Claim
Extruder Indicator collection 2 for Bambu Lab A1 Series printers
Boost
11
22
9
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
15 min
1 plate
Boost
11
22
9
2
24
16
Released
Description
This is Collection 2 of my extruder indicator series! For now it is just one model that @richard.sikorsk suggested, tested, provided feedback on and took the current photo! Huge thank you to him for the suggestion and the help!
Print settings
- Layer height 0.16
- Arachne wall generator recommended for better dimensional accuracy. If it doesn't fit check to see if you used Arachne.
Find My first collection here
Find @TheCraftyMakers collection here
Comment & Rating (9)
All
Ok, dumb question..how do you attach it? I printed it, but unsure how you put it on...use double side tape? Does the back come off after printing..seems you don't have a round base like what I printed...?
The designer has replied
0
Reply
you pop off the front cover. take the stock one off then press the printed one onto the little shaft. if it doesn’t fit reprint with arcane turned on. hope this helps. if not post a photo of yours so I can see.
1
Reply
Replying to @jeremymakes
ah ok! I didn't know you take off that little orange one in there...what is arcane? hadn't heard that before
0
Reply
Replying to @martin.sibertig
it is a setting that makes the print more dimensionally accurate.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
works awesome
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
i love transformers and having my own little autobot printer is awesome, thankyou
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld