frame starwars millenium
Remixed by
Boost
87
148
34
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2.2 h
3 plates
Boost
87
148
34
0
319
351
Released
Description
This is a custom-made frame for the design of the millennial falcon
https://makerworld.com/en/models/53373#profileId-55147
Comment & Rating (34)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
I had to reprint the back/stand because the supports wouldn't come off. Ended up painting the supports myself and using tree slim as opposed to normal and it printed right. Despite that, I love the frame!
The designer has replied
0
Reply
Thank you. I will review the design because it didn't give me any problems.
0
Reply
Replying to @acevalsl
It is entirely possible it is my filament. I've heard my preferred brand (Printbed) bonds to itself better than other PLA brands which would be an issue for support removal so it could completely be self-inflicted. Might help if the hinge were longer as the thin part of the stand broke from the hinge when I was originally removing supports.
0
Reply
Replying to @Intrepid3D
Can you send me photo With the part that you say is weaker so that it reinforces it, please. Thank you
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I printed without the logo, with my profile. My X1C had the door closed which may have caused my PolyTerra PLA to blob a bit on the corners, making the fit a bit too snug, but a bit of touch up and it was fine and that’s something I expect to manage. All in all a great finishing touch to a fun print model.
The designer has replied
0
Reply
Nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Schöner passender Rahmen zum Bild.
Danke für das bereitstellen der Daten.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfekt addon for the "junk in space" display.
0
Reply
very Nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
turned out great.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
nice
thanks
0
Reply
Is everything just glued together ?
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good idea but the wall hang option is not so well
The designer has replied
0
Reply
What idea? It's not to hang on the wall.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Turned out great but when loaded with the Print it is still a bit front heavy and on the verge of falling forward, may remix it and make the hinge on the back larger so it tills further back a bit more
0
Reply
This remix is based on
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld