M9 军刺（M9 Bayonet）
Copyright Claim
M9 军刺（M9 Bayonet）
Boost
387
619
69
Print Profile(4)
AMS Multi-color A1 mini 0.2mm layer, 3 walls, 15% infill
2.6 h
1 plate
0.2mm layer, 2 colors, high strength
2.7 h
2 plates
0.2mm layer, 3 walls, 30% infill seprated
3.2 h
2 plates
【A1M/NO AMS】0.2mm layer, 3 walls, 35% infill
4.1 h
2 plates
Boost
387
619
69
5
1.5 k
488
Released
Comment & Rating (69)
All
嘎嘎帅
2
Reply
兄弟你这个是用的哪个配置啊，默认的那个打出来好小，有缩放吗
0
Reply
bro what are those filaments, both look insane
0
Reply
Print Profile
0.2mm layer, 2 colors, high strength
Failed 4 times i use 0.12mm layer height at first failed 3 times change to 0.2mm layer height still the same issue. changed infill type and still cannot resolve the issue
0
Reply
It could be due to insufficient adhesion of the 3D printing bed. At high printing speeds, the nozzle may collide with the model, causing it to detach from the platform. It's advised to use an LAC spray to enhance the bed adhesion, add a brim to the model, and reduce the gap between the brim and the model.
0
Reply
It is recommended that you slow down the printing speed.
0
Reply
Print Profile
AMS Multi-color A1 mini 0.2mm layer, 3 walls, 15% infill
Appreciate the design brother, I actually ended up splitting it in half and adding connections to so I could put some writing on the blade for a gift.
There was a significant improvement in quality too for those interested in doing this on a larger scale.
0
Reply
hey mate any chance of sharing where you got the skull? id like to do something similar for a gift.
0
Reply
https://makerworld.com/models/158101
that's the skull mate 💀
0
Reply
Boosted
Print Profile
【A1M/NO AMS】0.2mm layer, 3 walls, 35% infill
printed in pla-cf for a great look
1
Reply
Hi guys i printed this model three times and eveytime it falls over when almost finish. I use 0.12mm layer height and gyroid infill. i changed the orientation and infill to adaptive cubic the last time and it still falls over. Any suggestion?
0
Reply
Print Profile
0.2mm layer, 2 colors, high strength
Perfekt
0
Reply
Print Profile
【A1M/NO AMS】0.2mm layer, 3 walls, 35% infill
Very cool, I recommend it for printing on the a1 mini
0
Reply
der Griff ist aus PLA und die Klinge und die anderen grauen Teile aus PETG dadurch hat die Klinge nicht zu 100% in den Griff gepasst.
Trotzdem sehr schön geworden 👍🏽
0
Reply
非常感谢分享，做出来效果很棒。
0
Reply
Print Profile
AMS Multi-color A1 mini 0.2mm layer, 3 walls, 15% infill
Printed very well!!!! Might have to try the scaled up version
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld