A simple and easy to print Ben10 fridge magnet.
Hardware:
Printing Instructions:
- Layer Height: 0.2mm (Important for multicolor prints to ensure 2 layers for green, black)
- Infill: 15%
- Supports: No
- Rafts: No
- Brim: No
- Skirt: No
For Multicolor Print:
AMS / MMS:
- Paint Green and Black in the Slicer
No AMS / No MMS:
- Slice model with Grey
- At layer 36, change to Green filament
- At layer 38, change to Black filament