Support Filament Testmodel - any PETG as support for PLA and more
Copyright Claim
Support Filament Testmodel - any PETG as support for PLA and more
Boost
8
17
4
Print Profile(2)
PLA with PETG Support 0.2mm layer, 2 walls, 15% infill
Designer
1.5 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate
Boost
8
17
4
1
112
55
Released
Description
PETG and PLA do not adhere together. This makes it easy to separate the component from the support.
This ensure overhangs and smooth surfaces are guaranteed even with supports.
This Model is easy and quick to print. Afterward, the print profile can be saved and used for other models.
Size: 2 x 2 x 1cm
Printtime: 1h12m
Comment & Rating (4)
All
Print Profile
PLA with PETG Support 0.2mm layer, 2 walls, 15% infill
Great Testmodel; I printed it with PETG as the main material and PLA as the support.
The designer has replied
1
Reply
Thanks for the feedback! Glad to hear it worked out for you too.
0
Reply
Print Profile
PLA with PETG Support 0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
PLA with PETG Support 0.2mm layer, 2 walls, 15% infill
1
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld