《sacru osse》SH-01 prototype 圣骸原型机 by 星骸造物-StarK

星骸造物-StarK

Hobby & DIY>Robotics

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 25% infill

Designer

15.8 h

6 plates

4.9(36)

Adapted to A1mini, 100% scale, PLA

20.8 h

10 plates

5.0(1)

Boost

1153

1725

195

4.9 k

2 k

Released

Description

Documentation (1)

Assembly Guide (1)

SH-01 圣骸原型机组装说明图.pdf

Comment & Rating (195)

@ACEADAMarchery

太棒了！我自己找了一个反曲弓的文件，调整了大小以后配合上去。非常惊艳。很符合我们射箭俱乐部的风格。甚至某种程度上大自由度的关节模型甚至可以用来做教学示例！

The designer has replied

@StarK

我去！帅啊！这个弓模型是否可以上传一下呢！好帅哦！

@ACEADAMarchery

Replying to @StarK :

这个弓的模型其实需要调整的部分太多，例如弓片弯曲角度不对，我用热风枪加热了。另外弓弦也是后加的，手持部分也用刀大改了。期待大佬画一个原生支持的！需要任何弓箭相关的技术支持随时联系我~

@StarK

Replying to @ACEADAMarchery :

没问题！画这个，简单！

@user_4020205726

真的很帅，就是打磨和组装很废手。

The designer has replied

@StarK

打印模型嘛，很多东西难控制

@user_4020205726

Replying to @StarK :

理解的，期待up设计出更多优秀的作品

@psc69xzz2k

你个小黑子

@mushroomlsk

PLA，标准配置打印。电磨、锉刀开路，圣水辅助，总算装上能动。UP NB

The designer has replied

@StarK

pla没有韧性，我是基于PETF设计的，机械零件很多地方都需要过盈配合。PLA包括PLA+都不适合。

@mushroomlsk

Replying to @StarK :

其实还好，只是部分螺母不好安装，大约只安装了1/3的螺母。模型本身的配合基本满足要求，大力出奇迹。

@StarK

Replying to @mushroomlsk :

2.0的就好啦，没那么多螺丝啦

@thqapple

This robot is extremely mobile.

@neil_1821

How did you get the red to illuminate like that? Certainly looks very cool.

@ZhangSheng

卧槽太赞了！

@MayMay

可可爱爱奇奇怪怪的美感

The designer has replied

@StarK

感谢支持！

@sebastian83.lau

Let the puzzle begin:) The print result is nicely ;)

The designer has replied

@StarK

建议放弃原装的手部，去打印新的手部2.0！

@sebastian83.lau

Replying to @StarK :

Thx for the Info i will Print the V 2.0 Hand now. Here a picture of the finish Version. it calls HULK :D

@StarK

Replying to @sebastian83.lau :

棒！

@Eliauk

Print Profile

0.12mm layer height

超酷的模型，装配热熔螺帽可以准备好防风火机和钳子，最好用碳纤维petg做骨架，pla可能会有零件损耗。总的来说效果超过我预期

@King_Savage

Print Profile

0.2mm layer, 2 walls, 25% infill

only half way done with it building it off and on but so far I’m loving it the build design is amazing looking forward for other projects that you come up with

The designer has replied

@StarK

There will be more things slowly appearing~such as SH-02 SH-01S~ You can take a look at the 01S video first 【SH–01S 武曲星阶段展示～～】https://www.bilibili.com/video/BV1ru4y1p7qw?vd_source=0a1bfb7d657c7fa51793084bf294b069

(Edited)

@StarK

By the way, don't print the active palm yet. I'm about to release a new version of the active palm.

@King_Savage

finally finished him. I have to say I really love this guy here. probably one of my favorite prints ever

@MAFIA_SKULL

The diameter of the holes is not good, for the 3x3x5 inserts. Scale all object ,and it should be good

(Edited)

The designer has replied

@StarK

Why zoom in? Isn't that model bigger?

@MAFIA_SKULL

Replying to @StarK :

zoom in because the insert holes are too small 3.95 mm, to put 5mm inserts

@StarK

Replying to @MAFIA_SKULL :

What material are you? Many players here have reported that PLA materials can be difficult to assemble, or even impossible to assemble. It seems that PLA materials are more prone to expansion.