Please enjoy this HueForge print of Tornado from One Punch Man.
I would really appreciate any and all feedback and would love to see some comments/pics of your prints, especially if you change the colours or remix!
Make sure to print as below if you grab the raw file:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.6
PLA BambuLab Metal Oxide Green Metallic Transmission Distance: 5 (use a standard green if you like, still looks great)
PLA Kingroon White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Oxide Green Metallic
At layer #16 (1.36mm) swap to White for the rest.