PTFE Tube Cutter for AMS Helper Mod / AMS Spool Stabilizer
Copyright Claim
PTFE Tube Cutter for AMS Helper Mod / AMS Spool Stabilizer
Boost
43
122
15
Print Profile(1)
v2 | 0.2mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
Boost
43
122
15
0
144
65
Released
Description
This PTFE Tube cutter is designed with a precise length of 27mm, ensuring an ideal fit for all PTFE modifications of the AMS Mod (like my own variant). To prevent the tube from getting stuck, straighten it thoroughly before inserting it. If the tube becomes lodged inside, assist by gently pushing it with a small object, such as a piece of filament or a paperclip, from the far end toward the opening.
Update
25.12.2023: The pushback mechanism has been relocated to the top, eliminating the need to probe into the PTFE tube. This modification makes the new pushback slot more user-friendly and accessible. Please note that third-party print profiles may not always be current or updated.
Comment & Rating (15)
All
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
Thanks!
The designer has replied
0
Reply
Thank you for the rating!
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
2023-12-15
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
Strength Issue
The designer has replied
0
Reply
what do you mean with "Strength Issue"?
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
v2 | 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld