Easy print, dual color will look great!

If you want to print with the color change at a certain level, import the sagoma file first and then the vespa 1950 stl file. Resize and align (the vespa stl will look better if it is the 98% or the sagoma stl file)

If you want you can also print in reverse mode, with 2 colors on the same layer. Here is the method:

1. open prusaslicer and set 2 extruders (printer settings) - remember to activate or deactivate purge tower
2. load the “sagoma” file
3. right click on the “sagoma” file, add a modifier and load the vespa 1950.stl
4. resize and align. If you set the vespa 1950 height at 0,20 the file will be printed only in the 1st layer
5. vespa 1950.stl must be on extruder 1, "sagoma" on extruder 2 (you must assign different colors to each extruder, 1st extruder black color and 2nd extruder white color). Remember that if you use reverse mode print you need to mirror the images.
6. ONLY ONE TIME: add to the “printer settings”, “custom gcode”, “tool change gcode” these few lines

;START_CUSTOM_TOOL_CHANGE LAYER
[layer_z] / [layer_num]
{if layer_num >= 0}M600{endif}
;END_CUSTOM_TOOL_CHANGE

the printer will print the black lines (extruder 1) then will print the white color (extruder 2) on the same layer. All other layers will be white only

Layer height 0.2, ask me if you need help