Tested materials: PLA, PETG, ABS, ASA
Tested layer height: 0.2mm (thread is toleranced therefore)
Tested printers: Bambu X1C (Bambu Slicer), Voron 0.2 (Cura)
NO supports needed, but you will need a few seconds more to assemble the inlets.
Wall-thickness: 11-15mm
Hole-diameter: 60mm (OD 58mm)
Version 1: 1x 5mm hole (12V cables)
Version 2: 1x 9mm hole (230V/120V cables)
Version 3: 2x 5mm hole (12V cables)
Version 4: 2x 9mm hole (230V/120V cables)