Bambu A1 Mini First Layer
Copyright Claim
Bambu A1 Mini First Layer
Boost
34
52
17
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
19 min
1 plate
Boost
34
52
17
0
153
112
Released
Description
Description:
Print the Layer Height and Adhesion Test to verify the accuracy of your layer height and adhesion settings on your Bamboo Lab A1 Mini 3D printer. This test print is designed to provide quick feedback on these critical parameters.
Features:
- A diagnostic test print that checks the layer height and bed adhesion settings for optimal 3D printing results.
- The test covers the entire 180x180mm bed surface to assess adhesion across the full area.
Comment & Rating (17)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
good test print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
pretty good, also idk but i use it to clean my bed
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good for checking if the bed is leveled, I have a prusa and this has never worked but on the mini it’s almost a perfect first layer
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good model
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Awesome tool for tuning filament. Bambu Lab needs this on the SD card on day one.
0
Reply
I wish Bambu Lab would put this file on all new printer SD cards. Thank you.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld