爱尔兰哨笛 Irish whistle 平口 Flat mouth 中音G调 Key G 两节 Two sections
Copyright Claim
爱尔兰哨笛 Irish whistle 平口 Flat mouth 中音G调 Key G 两节 Two sections
Boost
61
143
20
Print Profile(2)
0.2mm layer, 6 walls, 30% infill
Designer
3.4 h
1 plate
0.2mm layer, 6 walls, 30% infill
2.4 h
1 plate
Boost
61
143
20
0
388
88
Released
Description
这是自己设计的一款平口哨笛，中音G，用拓竹P1SC打印，黑色材料是天瑞petg eco 0.4喷嘴，实心填充，打了两个多小时，用了不到100g料。
初试感觉还行的，音准音色还有很大的提升调整空间，可以用来吹着玩或者练习指法，长期学习建议购买专业演奏级哨笛。
制作及试吹视频在以下链接
原创不易，图纸转载请注明出处，谢谢大家
Join the two sections of pipe together.And zhen blow it.
Comment & Rating (20)
All
Print Profile
0.2mm layer, 6 walls, 30% infill
can't give 5 star due to bambu not allowing. print great. sound is on the lower side.
0
Reply
Why can't we give five stars? I didn't understand.
0
Reply
Replying to @fancyage
because its not printed in a bambu printer, makerworld will grey it out. cannot give 4 or 5 star unless its printed in a bambu printer. but when i print this, my bambu printer was printing other things thats why i am using another non bambu printer.
(Edited)1
Reply
Print Profile
0.2mm layer, 6 walls, 30% infill
gut gedruckt und macht auch Töne
1
Reply
Print Profile
0.2mm layer, 6 walls, 30% infill
failed the first print as I ran out of filament but second attempt turned out great tight fit but works as it should
1
Reply
Print Profile
0.2mm layer, 6 walls, 30% infill
it Works fine
0
Reply
透明色打印的 挺好的 设置打印没毛病 五星好评
0
Reply
Print Profile
0.2mm layer, 6 walls, 30% infill
It's kind of hard to remove the support within the top half. print well and sounds well.
(Edited)
0
Reply
Print Profile
0.2mm layer, 6 walls, 30% infill
Actually sounds legit, when I can play it right.
0
Reply
很好的笛子，使我旋转
0
Reply
how tall of a 3d printer do you need?
0
Reply
Print Profile
0.2mm layer, 6 walls, 30% infill
I couldn’t play very well
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld