kd_1619524859

Normal Spring, 0.2mm layer, 2 walls, 15% infill, improved tolerances

12gadge

TripleGWorkshop

cover

2023-10-27_p6p3ksgbawe1.jpg

IMG_20231031_223741.webp

IMG_20231031_203347.webp

IMG_20231031_223559.webp

plate_1.webp

plate_1.png

LDVCO.

Printed in PLA+I had issues with assembly so I fiddled around with tolerances a bit.Fits are still a little bit tight but assembly is doable with some care! This way you won´t need any glue.&nbsp;Assembly of spring in tree:If you apply pressure make sure to apply any force only in axis to the spring to not overbend it. Alternatively you can use two flat screwdriver heads to apply pressure directly and uniformly to the spring head.&nbsp;Assembly of spring in foot:Almost same as for tree, use slight force in line with the spring axis as the spring will easily break if it´s skew.

IMG_20231117_205630.webp

IMG_20231117_205638.webp

IMG_20231117_205653.webp

I first printed this tree with the normal spring in PLA+. However I noticed that after two weeks the trees sagged to one side and look a little bit sad. That´s why I´m also providing this profile with the wider spring. I think the springiness of the normal spring is better, but either print the normal spring in a different material or print the wide spring for longevity of the print.

Wide Spring, 0.2mm layer, 2 walls, 15% infill

Vase Mode Xmas Tree ☆

Xmas Tree with Star Bobblehead

Global

Print Profile(2)

Description

Comment & Rating (2)

This remix is based on

License

Related Models

Bobble Dog

Funko Pop / Bobblehead Stand

twisted spiraling tree

C3PO 1