AMS lite wall mount IKEA SKÅDIS
Copyright Claim
AMS lite wall mount IKEA SKÅDIS
Boost
58
119
16
Print Profile(2)
0.2mm layer, 3 walls, 10% infill
Designer
2.4 h
1 plate
0.2mm layer, 3 walls, 10% infill
2.6 h
2 plates
Boost
58
119
16
10
140
98
Released
Description
AMS Lite wall mount for the IKEA SKÅDIS Serie.
No extra screws necessary. Plugged and stable version also in PLA.
Print twice and simply attach to the holder with the existing 4 screws.
Comment & Rating (16)
All
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
cooles Teil. passt super!
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
perfect. the snap is little thik
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
no entra muy bien pero tiene fácil solución
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
I had to adjust the size a bit. Otherwise OK
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Great solution to get space back on my workbench. Depending on the SKÅDIS holes and variations in prints, I had to file off about 1mm from each tab. I don't have any concerns about breaking or falling out, though.
Used some SKÅDIS hooks (model 157071) to route the cable, which pulled between the spools and the body.
For the A1 mini, printed each piece individually in Lake Blue PETG Basic: send one side to printer, manually reprint from success dialog, repeat for other side.
0
Reply
Works perfectly. Thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Sehr stabil mit genügend Abstand um auch Boxen für die Rollen anzubringen
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Perfect thanks.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Passt perfekt, jetzt hängt das AMS leger an der Skadis Wand😊
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoDerivatives
© 2024 MakerWorld