Build Your Own Holiday Scene by NC-Designs

NC-Designs

Household>Festivities

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

Nativity Scene - 0.28mm layer, 2 walls, 15% infill

Designer

2 h

2 plates

4.5(2)

All Holiday Scenes - 0.28mm layer, 2 walls, 15% infill

Designer

6.9 h

8 plates

Winter Forest Scene - 0.28mm layer, 2 walls, 15% infill

Designer

3.8 h

4 plates

Santa Claus - 0.28mm layer, 2 walls, 15% infill

Designer

3.1 h

4 plates

Boost

Released

Description

This is a build your own holiday scene set with three different scene options: Christmas/Santa, Nativity, & Winter Forest. The base has three rows to layer the different pieces (they slide in and out easily) and lighting can be added in many different ways in and around the pieces.

If using the raw model files, the STLs are grouped by scene but can be “split” in the slicer program into the separate parts (to avoid listing 15+ different STLs). I also included the STEP file of the piece base profile for anyone who wants to create custom pieces and/or scenes.

winter wonderland 2023

Comment & Rating (3)

@jharvey1309

Print Profile

Nativity Scene - 0.28mm layer, 2 walls, 15% infill

Printed very well. Maybe a bit too snug of a fit so if I printed again I would scale the base a tiny bit larger.

The designer has replied

@NCDesigns

Thank you for sharing your make and rating! That is interesting that it was too snug for you, I erred on the side of too loose but it may have not been enough for everyone's different printer/filament setup.