Hello Titties Keychain / Magnet collection
3 versions are available and each version has an AMS and Color Swap edition with and without a hole.

I have included all the files you need even gcode for Bambu printers
Print Face Down with .2mm layers, I also tweak the line width to .24 for the first layer and .3 for all other layers, this includes infill.
4 bottom and top layers, the 4th bottom seals in the color and fills in any gaps.
Each model is separated into sections where appropriate and a backer. The color sections are .6mm thick the backer is 2mm.
These can be scaled up, I don't recommend scaling down.
Be mindful of the Z when scaling up, It doesn't need to be 10mm thick, Z can stay at 2.6mm.

Version 1 is not labeled as such, its just called Hello Titties in the file names.
KC - Keychain (it has a hole)
CS - Color Swap (No AMS or MMU needed)

Version 2 is a more life like version
Version 3 is the Orange County Florida version

If you use the non CS STL's do not resize any objects, it may ask you.

I attach a 20mm square magnet to the back.

I hope you enjoy these models.