Clocks with faces made with emojis from Make My Sign. Faces are 195 mm diameter and printed face down for smooth or textured finish. There are 4 profiles included. One with all the components for both clocks, one for the case only, one for Smiley Face and one for the Beer, TV, Bed face. Wall hang or use the optional display stand for mantles or shelves. All printed with .4mm nozzle at .2mm layer height. Some minor support is required for the clock case and is easily removable with needle nose pliers. Use 3x8mm hex screws for the face and display stand. If you prefer to glue the face into the case, the face profiles have an option to print it with just the center hole for the clock hands.

I used these clock movements.

MORE CLOCKS

Printing Instructions

I used PLA at 5% infill with a brim to minimize the potential for lifting from the plate. To assign your own colors, simply select your AMS filaments in the proper slicer slot.