Gadget Weed/Cannabis Grinder!
Happy Smoke ;) 420
These are my recommendations for printing this model with PLA
-Infill: 20-40% (I recommend a 40% infill for a good mechanical resistance)
-Extrusor: 205
-Hot bed: 55 C°
-Retraction: Active
-Quantity of pieces: 9 (Download link in the .txt file)
-Some parts need support.
-Layer height: 0.2 mm
Note: You can glue the Handle with the Blade after to insert the top lid.
You can also print the upper part of the lid separately in a translucent material