Cable Tie TPU
Copyright Claim
Cable Tie TPU
Boost
131
275
86
Print Profile(3)
TPU 95A 0.2mm layer, 2 walls, 100% infill
1.1 h
1 plate
A1-Mini-TPU_Cable_ties
1.1 h
1 plate
Shorter TPU cable ties (4 holes)
31 min
1 plate
Boost
131
275
86
3
689
689
Released
Description
Cable Ties to be printed with flexible materials like TPU.
The sizes are:
- 90 mm
- 110 mm
- 130 mm
- 150 mm
- 170 mm
I printed the mounts in PLA - 3 Perimeter 20% Infill 0,2 mm layer height. But ASA or PETG will be a better solution for the long run if you place heavy things on the holder.
Have fun and keep printin!
Comment & Rating (86)
All
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
have some problems but that's probably because I use TPU from sunlu instead of bambu lab
1
Reply
Make sure to dry the TPU and it might even be worth it to print with the spool actively in a dryer.
(Edited)1
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
Ottimo
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
TPU 64D kexcelled
Excellent resistance, very difficult to break
0
Reply
Print Profile
A1-Mini-TPU_Cable_ties
works, lot of strings, i think i need to dry the filament
(Edited)
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
My first TPU print. It came out perfectly.
0
Reply
Print Profile
A1-Mini-TPU_Cable_ties
Really nice with TPU from Geeetech!
0
Reply
Boosted
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
Came out great and work really well!
0
Reply
Boosted
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
this is a very cool design. it works well and prints quick. I used overture 95a tpu, came out great
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
printed perfectly
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
came out great in TPU!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld