Luffy from OnePiece for wall art decoration made via Hueforge. 4 Colours are included in 3mf file (made in OrcaSlicer and BambuStudio) but can be adapted according to your needs. The stl file is also included if you want to make your own experiment. It was printed with a 0.08mm as layer height and 0.16mm for the first layer, and 100% infill with rectilinear pattern.

Don't forget to upload your make!

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Army Blue
At layer #9 (0.8mm) swap to Sunrise Orange
At layer #16 (1.36mm) swap to Cotton White for the rest.