Heavy Duty spool rewinder Remixed by lemanruss

Remixed by

lemanruss

3D Printer>3D Printer Parts

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 5 walls, 35% infill

Designer

30 h

3 plates

4.5(92)

0.2mm layer, 3 walls, 25% infill

22.9 h

3 plates

4.7(23)

0.16mm layer, 3 walls, 25% infill

27.8 h

9 plates

4.5(17)

motor parts 0.2mm layer, 3 walls, 12% infill

9.2 h

1 plate

Boost

185

368

168

1.6 k

2.6 k

Released

Description

This is a print setup for the Filament winder by Miklos Kiszely with the upgraded parts by Damian

Comment & Rating (168)

@riggs68

hello i get this error, just by loading up and slicing plate. ive changed nothing. other than which fillament. im a newbie.thanks!

@riggs68

well i made another plate, separating the two different filament's, and moved stuff around, and that fixed the issue. im just a noob, this is my 4th print.

@quentindelmelle

Replying to @riggs68 :

your cleaning tower was on the little white corner at the bottom left, you don't need anything on it, just move your tower a little

@ACEHOLE3D

Print Profile

0.2mm layer, 5 walls, 35% infill

Great setup. Went with the heavy duty Spool Winder. Video is a great help to set this up. A little tedious trying to get it all working perfect!

@CreaSim

Bonjour cest quoi la marque du filament rouge bordeaux ? je cherche comme ca depuis longtemps merci

@ACEHOLE3D

Replying to @CreaSim :

@CreaSim, it was SUNLU PLA+ filament from amazon. Matte Red , Amazon ASIN B0BD7KXV4K

@Malkus

Print Profile

0.16mm layer, 3 walls, 25% infill

Missing parts to assemble according to the assembly guide of the upgraded parts. 2mm spacer missing, worm gear split in 2 halves.

(Edited)

@boggisthecat

The long rod has a notch that holds the screw. It replaces the two-piece design of the original. Notch goes toward the edge opposite the gears, and stops the screw.

@Malkus

You are giving me vad credit for someone elses design. these are not my parts! I ask you to revise the mark and comment I only made the catch hook securing the drumb roll.

@boggisthecat

Build using parts from this collection, plus the handle from the original make. Note that the long hex rod replaces the two sections of rod in the original. Notch is toward edge opposite gears - see last photo.