The only Poop-Deflector you`ll ever need! (Toilet-Poop-Deflector)
Copyright Claim
The only Poop-Deflector you`ll ever need! (Toilet-Poop-Deflector)
Boost
67
104
40
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
45 min
1 plate
0.16mm layer, 2 walls, 15% infill
45 min
1 plate
Boost
67
104
40
2
201
149
Released
Description
The only Poop-Deflector you`ll ever need!
I created this Poop-Deflector-Toilet to help catch your A1/A1 Mini Poops so they dont fly all over your Room.
Just place a Wastebin under it and most of the Purges should drop in there.
It has to be printed with support but you can just download the Print-Profile. Supports are already created.
Best regards
Philipp
Comment & Rating (40)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Too funny not to print. Will see how effective it is in the long run but I love it.
0
Reply
First poop stuck to it, problem is the poop is hot when it gets flung :(
Might try printing with PETG and see if that helps with that.
(Edited)0
Reply
Replying to @teh_chaosjester
Read on another poop deflector design that using tape makes the filament stick less (on the poop landing area), maybe you could try this before reprinting it in petg.
(Edited)1
Reply
Replying to @swiss.3dprinter
Just threw on a bit of clear packing tape, looking good so far.
0
Reply
Hi, unfortunately, not compatible with a1 mini. Care to help? It says:
The designer has replied
0
Reply
Hi, you have to change your Printer at the top left Corner in Bambu Studio. Then it should work :)
0
Reply
Replying to @laumerphilipp
thank it helped me to
0
Reply
Works great! Thanks a ton Phillip for this most excellent design. I am a plumber so this is simply perfect for my A1!
The designer has replied
0
Reply
Saw your Reddit Comment earlier today! Thank you for posting the Picture. Glad you like it :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
excellent
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
ottima idea! bellissimo e divertente 😁
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Really cool! Thankss
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I love it! 😂
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed great and fits well!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed in PLA great, but switched to a different design as poop globs kept getting stuck. maybe I’ll try this in PETG. I saw a version where there’s less surface area for contact, will experiment with these!
(Edited)
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld