I actually have the sign that this model is based on. I was happy to find it here so I could print a few more for some rental properties we own. Unfortunately, the magnets aren't strong enough to hold the sign up. In the attached picture, the printed sign is slowly sliding down the door. A few differences between the original and this model: 1) The original sign is smaller than this model, about 92x61 mm. 2) The original is made out of a rubbery material. If this model were printed in TPU, the increased friction might keep it from sliding down the door. 3) The letters on the original aren't raised, and the thickness of the original is about the same as this model without the raised lettering. If the letters weren't raised, the increased surface area in contact with the door and the decreased distance of the magnets to the door might keep it from sliding. 4) The biggest difference is that the original works by having a flat piece of metal embedded in the sign which sticks to a round 12.5x3.5 mm magnet that stays on the dishwasher door. This is a great reproduction, but currently doesn't work for me as designed. I'd love to be able to modify it!