PS5 DualSense 控制器支架 V2（无LOGO）
Copyright Claim
PS5 DualSense 控制器支架 V2（无LOGO）
Boost
40
54
26
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
1.5 h
1 plate
0.2mm layer, 2 walls, 10% infill
1.2 h
1 plate
Boost
40
54
26
0
198
139
Released
Description
描述
我重新设计了v2版本，使其更加圆润、时尚。
产品介绍：
大家好！我很高兴与您分享我的 PS5 控制器 3D 打印支架设计。该支架非常适合存放和展示您的 PS5 控制器，让您的游戏空间保持整洁有序。它采用独特的几何形状设计，使展台既美观又实用。提供后部支撑的能力已得到增强并经过广泛测试，以确保其完全稳定且不会翻倒。
设计和印刷细节：
设计工具：Fusion 360
打印机：Bambu Lab X1
材质：Bambu PLA 哑光
层高：0.2mm
填充率：15%
支持： 无需支持
打印时间：约3小时
该支架的设计考虑了简约和时尚，提供了易于打印的坚固结构。只需使用 Bambu Lab X1 3D 打印机和 Bambu PLA Matte 材料，即可打印层高 0.2mm 和 15% 填充的打印，无需支撑结构。打印时间约为3小时。
Comment & Rating (26)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
fits perfect.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This is awesome!! The controller fits perfectly!! 🤩 do you mind if I remix this print?
0
Reply
贴合度非常高，用大理石纹理的petg打印，效果非常棒。。。。五星推荐
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
bottom didn’t come out to good on overhang so might chop a few mm off if I have to print again. apart from that looks good
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed Successfully but only showing my cancelled print that was a user error(wrong setting selection). Does exactly as described and holds both controllers snug.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Top fit with joypad, greate job!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Made this for my buddy (printer in black) and he loved it. Test fit it beforehand and fit like a glove. Easy print and worked perfectly. Thank you!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Toller Halter, evtl schlankeres Design
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Magnifique c'est le 2eme que j'imprime ☺️
(Edited)0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
© 2024 MakerWorld