I wanted to use my terrible 3d skills to create a plaque to remember my Philadelphia Eagles SUPERBOWL WIN!

So i sat down and started designing it. I ended up going with 290mm diameter circle and I designed/laid all this out in tinkercad. The base plate is 1.5mm tall. The green layer is 1mm high, then the black layer is 1mm high, followed by 1mm grey, 1mm white and 1 final 1.5mm grey on top. It allowed me to get the words in green and the philly special play! and the complete colored eagles logo.

I printed it on my trusty CR-10s that I love and its 300x300x400mm build area. I used S3D so I used the tool slice each layer where i do color change into saved gcode and then print them 1 at a time on top of each other.

Total print time: 9 hours
Estimated material cost: $2.50
Total Weight: 153g

I've uploaded .gcode files I created as well to make it super easy to print different colors. Just load up one at a time. start with 1 end with 6.

layer 1: white
layer 2: midnight green
layer 3: black
layer 4: grey/silver
layer 5: white
layer 6: grey/silver

Enjoy and please give me any feedback!