Elegant and sturdy drawer box with snap closure for Skat and similar playing cards. There are 2 variants of this box - with and without imprint.
Please print in the specified orientation, with a layer height of 0.2 mm and a line width of 0.4 mm or more. Do not use a different layer height as the snap closure is specifically designed for the mentioned layer height.
I made the snap closure extra strong to prevent accidental opening - for example in a travel bag. If it is too strong, you can smooth out the snap spots in the frame with a nail file (see last picture above).
If you have thicker fingers (like me), you automatically push the frame apart a little in the middle when you pull the drawer, which makes opening the snap lock much easier.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.