2024 Dragon Hueforge NO AMS Needed
2024 Dragon Hueforge NO AMS Needed
Print Profile(2)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a four color Hueforge, it will require three pauses with manual filament changes.
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ IIID Max Space Gray Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #21 (1.76mm) swap to Space Gray
At layer #27 (2.24mm) swap to White for the rest.
Comment & Rating (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
