NotForEveryone

cover

sst_printed.webp

plate_1.png

Printed mine in PETG but it does work in PLA as well. ABS may be a good option too.&nbsp;Prints with no supports without an issue for me as seen in the photo.&nbsp;I did 3 walls because it minimizes the amount of infill that is added which is ideal for this model. If you do 2 walls it gives it a very small amount of infill that is more likely to cause issues in my opinion.

0.2mm layer, 3 walls, 15% infill

This is for SST 27SF512 chips but may work for others too. I originally made this by request from a friend and thought I'd share it. Sometimes chips on ECUs can be really stuck in there and this can help you pull them out. It was made with 90s-00s Honda ecus in mind but I'm sure it would work for anything that takes a similar chip.

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Pringles Slider US 5.5oz

Puppy Chip Clip

Lion-head Handle

einkaufswagenlöser Opel

SST Chip Puller