English:
This small 3D-printed boat is powered by a balloon.
You can print it on a single plate; I made the white color layer above 16mm.
No supports are required for 3D printing.
You can insert the balloon over the designated opening and inflate it by blowing through the small hole where the air usually escapes. This way, you don’t have to take out the balloon every time.
Deutsch:
Dieses kleine 3D-gedruckte Boot wird von einem Luftballon angetrieben.
Du kannst es auf einer einzigen Platte drucken; die weiße Farbschicht habe ich oberhalb von 16 mm gemacht.
Für den 3D-Druck sind keine Stützstrukturen erforderlich.
Du kannst den Luftballon auf die dafür vorgesehene Öffnung stecken und ihn aufpusten, indem du durch das kleine Loch bläst, wo die Luft normalerweise austritt. Dadurch musst du den Luftballon nicht jedes Mal herausnehmen.