If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 4.8
PLA Generic Skin Tone Transmission Distance: 9.6
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA Default White Transmission Distance: 5
Swap Instructions:
Start with Red
At layer #18 (1.52mm) swap to Skin Tone
At layer #22 (1.84mm) swap to Yellow
At layer #25 (2.08mm) swap to White for the rest.