Replacement handle for a 5 gallon bucket. Larger diameter to make it easier to carry and use a heavy bucket.

Cut off the original plastic little handle, place this on, and slide the insert in with some superglue of your choice to hold it in place.

Insert is glued in place, no fasteners to loosen or catch on your hand. You can also stake them with a soldering iron.

The insert is printed flat on the bed with the Y pointed up.

The handle is printed vertical.

This is similar to a version I saw years ago but it is improved.

I print them in PLA at .35 layer with 4-6 walls on a .6 nozzle and 15% infill.