Update NOTE:
Newest design: https://www.thingiverse.com/thing:6382592

Hello,

First of all I would like to apologize to everyone that used my previous design and was experiencing issues.That previous design had numerous issues, that I hope to fix in this newer one.

Assembly materials:
You will need 8 magnets ( 4x 10x5mm & 4x 10x2mm and glue ) , 4 m3 3x50mm screws & 4 m3 nuts
( hexagonal).

Now big DISCLAIMER I have not printed and tested this design in the actual car due to a lack of a working 3D printer at my disposal. But I have high hopes that it will have no major issues.

Also I would like to thank Th3oRy for his work for the design for the CID display frame. I used and edited his face-plate for this design. And I would also like to thank Sergei Riazanov from the GrabCad website and his GID display CAD model.

Another DISCLAIMER, if you live somewhere where it can get really hot in your car ( 50c + ) I would recommend not printing this in regular PLA, it will soften from the heat and deform.

Lastly, I just want to wish you all the best in all your future 3d design and printing endeavors :)