Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
Cover x 5
40 min
1 plate
Boost
12
18
11
1
62
109
Released
Description
A simple cover/cap to cover up the unused holes for Aerogarden. It has a small lip for easy pick up.
I used PLA matte to minimize the reflection from the light.
Your feedback after printing would be greatly appreciated. Thank you!
Comment & Rating (11)
All
I used these as a flush objects on a print. Worked great and fit the holes in my older Aerogarden 7 and Ultra just fine.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Needed some covers and these work great. Look nicer and come off easier than aerogarden ones.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect fit. good model.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Works good!
0
Reply
Boosted
Very useful
0
Reply
Fanno il loro lavoro
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect fit
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld