Desiccant Spool Weight Adapter For Big Hole Spools (AMS) Remixed by maut3D

Remixed by

maut3D

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.28mm layer, 4 walls, 15% infill

Designer

9.4 h

4 plates

4.9(48)

Boost

217

321

Released

Description

Perfect for optimal filament spool weight and drying conditions.

Rings slide over the tumbler on each side of the spool.

Print 2 rings for every desiccant holder.

Share your 3D printed models to inspire others and celebrate your creativity

Comment & Rating (58)

@Numimadosa

Print Profile

0.28mm layer, 4 walls, 15% infill

Beautiful print. Well done! Now, I just hope, that it will fix the problem with my light spools inside my AMS. Thanks for sharing that object!

(Edited)

The designer has replied

@maut3D

Thanks for letting us know! How is it holding up?

@Numimadosa

Well, I love your design. For the dessicant works fine. I just found that the weight of dessicants alone. it doesn't seems to be heavy enough. My spool jump less than before but still doing it. Maybe i need to add something heavier. Any sugestions?

@thomas.m.dorey

I mixed in some copper BB's that I bought from Amazon for some extra weight. https://www.amazon.com/Crosman-Copperhead-Copper-Coated-Bottle/dp/B000HKKY7M/ref=sr_1_2?crid=TLSGXR8A0CHU&keywords=BBs&qid=1698973986&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&sprefix=bbs%2Caps%2C83&sr=8-2&th=1

(Edited)

@Cream33

Print Profile

0.28mm layer, 4 walls, 15% infill

good model for ams

@RB1105

Print Profile

0.28mm layer, 4 walls, 15% infill

Trying to prevent the AMS from pulling the spools up when low. I’ve tried a few feeders of different designs, nothing seemed to work well. printed off a couple of these and filled with some desiccant, seems to have fixed it right off the bat. Been very pleased hope it keeps up because it would be nice to have more desiccant on each spool so as they go between my bins, bags, and AMS it always has some.