This is a magnetic wall mount for the hair dryer from Laifen. Its mounted with double sided tape. 

Magnets

Magnets in the model are Neodymes 3mm x 5mm x 8mm. Each have an approximate force of 1,08kg. For this model I have used 8 pieces, and  I reckon this is the minimum. 

Magnetic holder

The magnetic holder (main body) supports magnets of the size  5mm x 5mm x 8mm as is. 

Material

I have used Originial Bambu Lab Lava Grey PLA-CF, but not sure if this is the perfect material for the model. It has a matte finish that looks nice with the black edition of the hair dryer.

Tool

When mounting the lid, I do recommend using the tool going back and forth a couple of times before finally screwing the parts together. The PLA-CF is not very smooth for threading and you may have to clean up abit before mounting the pieces together. 

3D-Printing

I have used small innfill in the main body, but increased the density on the tool so it wouldnt break. 

Wall mounting

If you mount it on a mirror I did, it will not look great with double sided tape as you will see the tape really good from the side. I recommend mounting it on a wall where you dont see it directly from the side, and with a color that matches the wall rather than the hair dryer, for estetics when the hair dryer is not up.