**01-28-2024** 

Revised the mounting using the Multiboard Step Files. Added an extra mounting snap for added strength(I noticed with adding 3 plates it would lean outward due to the weight, so I added the extra snap on top to hold better on the Multiboard.

Supports required(as I moved the snaps a bit more above the build plate) 

Used Standard Supports 

All other settings have not changed 

0.2 Layer Height 

2 Walls 

15% Infill

Thanks again to KG3Dee's design!!

---------------------------------------------------------------------------------------------------

3x Build Plate Holder for Multiboard(by Jonathan from Keep Making)

This was remixed from KG3Dee's Design, I just added snaps to attach to the Multiboard.

Pretty straight forward print

Sliced with Orcaslicer

0.2 Layer Height

2 Walls

15% Infill

Used Auto Generated “Mouse Ears” Brim to help adhesion and prevent corners from warping during printing