Supportless Smooth-Action Bowden PTFE Connector/Extender
Supportless Smooth-Action Bowden PTFE Connector/Extender
Print Profile(1)
Description
When your AMS needs a longer bowden tube coming out of it and you don't want to pay $5 or wait for the fitting…
Requires external parts; I used the PC4-M10 fittings from this kit (since I had bags of them lying around) https://a.co/d/hR6Yt9G
but these should also work: https://a.co/d/6xxTgX9
(Wrench may be required to tighten fully, but if they don't tighten fully it won't really hurt anything)
The sections for the ptfeAND the filament are tapered because I had issues with other designs not being able to smush my curled up PTFE into the straight holes and the surfaces would get a bit janky because supports.
Printed at .2mm layer height with the input facing DOWN (because supportless woot)
Tolerances tested for BambuLab ptfe tubes since I was makin this for my ams; idk if other brands would work but I assume they probably would.
Recommend printing the version with arrows since this only works to feed filament through in ONE DIRECTION
Comment & Rating (37)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
