Fidgetring Finger Spinner Print in Place
Copyright Claim
Fidgetring Finger Spinner Print in Place
Boost
2
18
13
Print Profile(2)
0.16mm layer, 4 walls, 15% infill
Designer
16 min
1 plate
0.16mm layer, 4 walls, 15% infill, BRIM!
Designer
17 min
1 plate
Boost
2
18
13
0
51
69
Released
Description
Small fidgetring witch I originally made for my wife.
Inner diameter is 18mm
I will adapt it to your size!
My Printsettings:
Layerheight: 0.16mm (i think 0.2 should work, too)
Wall count: 4
Top/Bottom surface pattern: Concentric
You can try to print with concentric infill but in my case there are some “dots” with “internal solid infill”. The cleanest print in my case was with the settings mentioned above.
Comment & Rating (13)
All
Print Profile
0.16mm layer, 4 walls, 15% infill
Fun to play with. It was a little hard to brake free at first. good size too.
Printed with PLA Polymaker in a P1S.
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
Strength Issue
The designer has replied
0
Reply
Hallo, danke für die Bewertung. Inwiefern gibt es Stabilitätsprobleme?
0
Reply
Replying to @starfalk
Hallo. Der Druck hat sich ein mal vom Bett gelöst. Ich denke man könnte die Haftung durch Kreise neben dem Modell erhöhen.
0
Reply
Replying to @lu3DDruck
Ich hatte bei ca. 10 Drucken keinerlei Probleme, werde aber noch ein Profil mit Brim einstellen.
Danke für die Rückmeldung
Welches Druckbett (evtl. verunreinigt?), welcher Drucker?
0
Reply
I tried printing this but the gyroscopic spinning bound way too much. The edge dimension seem to be off.
The designer has replied
0
Reply
Sorry to hear that, what printer are you using and have you calibrated the EM?
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld