Onigiri Mold
Copyright Claim
Onigiri Mold
Boost
19
39
13
Print Profile(1)
0.2mm layer, 3 walls, 20% infill
Designer
1.9 h
1 plate
Boost
19
39
13
3
65
76
Released
Description
Onigiri Mold
Please separate the mold and Onigiri with plastic wrap.
No supports
Comment & Rating (13)
All
Print Profile
0.2mm layer, 3 walls, 20% infill
Used this to make my own onigiri for the first time. Thank you! it worked very well. I will definitely get lots of use out of this. The tab may be fragile but you don't really need to press down on it if you are using plastic wrap.
The designer has replied
0
Reply
Thank you for your opinion. You make sense!
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 20% infill
very nice, thanks!
0
Reply
Boosted
Thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
everything printed well except for the tab. It is very weak and broke after a few uses.
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
![Sand Mold Creator [OpenSCAD]](https://makerworld.bblmw.com/makerworld/model/USb2bb561db810ef/design/2024-06-02_0eb127b322af2.png?image_process=resize,w_400/format,webp)
© 2024 MakerWorld