Undead face in Iron Maiden Eddie style.

Neew to print two different models:

• Undead
• Eyes

This way we gain more flexibility with colours and we can have eyes on a different colour palette. Many thanks to Hueforge for showing this technique recently on Youtube.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Part 1 - Undead

Filaments Used:

• PLA Overture
• PLA PolyTerra Charcoal Black
• PLA Overture Jeans Red
• PLA PolyTerra Pastel Peach
• PLA+ Sunlu Skin
• PLA+ Esun Bone White
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #4 (0.4mm) swap to Charcoal Black
• At layer #6 (0.56mm) swap to Jeans Red
• At layer #9 (0.8mm) swap to Pastel Peach
• At layer #11 (0.96mm) swap to Skin
• At layer #13 (1.12mm) swap to Bone White
• At layer #20 (1.68mm) swap to White for the rest.

Part2 - Eyes

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA+ Sunlu Pure Yellow
• PLA Overture Light Yellow
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #6 (0.56mm) swap to Charcoal Black
• At layer #8 (0.72mm) swap to Pure Yellow
• At layer #20 (1.68mm) swap to Light Yellow
• At layer #26 (2.16mm) swap to White for the rest.