AMS Lite PTFE Tube Removal Tool by kabendesign

kabendesign

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.12mm layer, 2 walls, 25% infill

Designer

31 min

1 plate

4.5(12)

Boost

Released

Description

To remove the PTFE tube from the AMS Lite 4 way splitter, I needed a tool to depress the fitting. So… here it is. My AMS Lite splitter is mounted very close to the rear sheet metal, so this tool was designed to access the fitting in its tight space.

Comment & Rating (14)

@mtaphorn

Print Profile

0.12mm layer, 2 walls, 25% infill

Printed nicely...

The designer has replied

@kabendesign

Great! You may be the first to print it. Hope it works well for you!

@piranha

Print Profile

0.12mm layer, 2 walls, 25% infill

works fine

@PCHuDSoN

Print Profile

0.12mm layer, 2 walls, 25% infill

perfect model and orientation. thanks

@para

Print Profile

0.12mm layer, 2 walls, 25% infill

Helped me in a time of need.

@Creative_3D

Print Profile

0.12mm layer, 2 walls, 25% infill

Simple yet effective. Works well.

@johnfcooley

Print Profile

0.12mm layer, 2 walls, 25% infill

Actually had a chance to use it, and it worked out very well. Thank you.

@lanz_berger82

Print Profile

0.12mm layer, 2 walls, 25% infill

Strength Issue

The designer has replied

@kabendesign

I'd be interested in having more details about the strength issue. Did yours break? If so, would you be able to describe where it broke, or a picture? Maybe I can improve on the design if there is an issue. I have not experienced any issue with mine.

@rapidraid

Print Profile

0.12mm layer, 2 walls, 25% infill

Support Issue:the brim was undetachable and needed manual work to remove it (knife). I worry that I damage the ptfe tubing because of the rough edges this created