Bottle Beer Opener Keychain
Boost
39
68
28
Print Profile(2)
0.2mm layer, 5 walls, 30% gyroid infill
23 min
1 plate
0.2mm layer, 6 walls, 15% infill
24 min
1 plate
Boost
39
68
28
2
224
184
Released
Description
Small & potable Corkscrew Keychaing. Print with at least 70% infill
Infill ≥ 70%
Enjoy
Comment & Rating (28)
All
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
works well
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
Well done
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
Can only be used once😭
0
Reply
I have 2 of them printed with 95% of infill and still works after 2 years
0
Reply
I advise you to increase the infill. Minimum at 75% but I recommend 90%-95%
0
Reply
printed decent. I had a .8 nozzle on when I printed several they were good but would be better with the .4 nozzle.
The designer has replied
1
Reply
I really apriciated your comment. I always print this file with 0.4 nozzle and 75% of infill
0
Reply
Small but useful bottle opener for crown caps. I have many of them in many different colors.
Big up 👍
The designer has replied
1
Reply
Really thanks! I really appreciate that you liked it
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
Printed in PETG, the edges warped up a little but it still came out fine and I do have a draft problem so not really the models fault. Works well, would be nice to have an additional profile with a brim but it’s easy enough to just add one yourself I suppose.
0
Reply
I really aprocoated! I'm considering making other versions but before uploading the templates here I want to test them for months and see if they work well
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
printed petg-cf but wont last very long i think. 😅 but what to expect from plastic va metalcaps. handy size
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
No print problem, good model
0
Reply
Print Profile
0.2mm layer, 5 walls, 30% gyroid infill
Printed on the fly during a party... didn't disappoint!
0
Reply
© 2024 MakerWorld