CASE-PIGGY BANK FOR YOUR MONEY AND MORE 😏 CASE-PIGGY BANK FOR YOUR MONEY AND MORE

Do you like piggy banks? I think so, who doesn't love them - you put money in them 😏

That's why I created this piggy bank, as secure as plastic can be. Designed an anti-tampering system to protect your money or jewelry.

Speaking of the anti-burglary system, the case has two modern locks, even if you cut the hinges, you won't open this marvel of engineering without a key.

I almost forgot, the key! It's not just the way to the treasures you keep under lock and key, it's also a kind of key fob, why not 😅

I used PLA plastic with the standard set of settings for the Creality K1.

0.4 mm nozzle

Layer thickness 0.2mm

All STL files are saved in the correct position for printing.

The setting of supports is standard. In general, when printing parts, the supports are used only at points where cutouts for inserts are needed, the main structures are printed as a monolith from bottom to top. The main support is in the place where the hinges are at the hull. In general, the weight of all the supports is somewhere around 5gm.

The weight of the piggy bank is 180gm.

Dimensions - Length 170mm, width 100mm, height 57mm.

All parts are made to tolerances, so there should not be much difficulty in fitting the parts during assembly. (Don't forget about chamfering after printing).

The model also comes with an assembly manual, where I have described the step-by-step assembly step by step with photos.

You can watch the live video here: https://www.youtube.com/shorts/6lqVjoOnUl0