Captain America Shield Lightbox
Captain America Shield Lightbox
Print Profile(0)
Description
A multicolor 3D model of Captain America Shield for a table lightbox
You will find each file named by color for an easy setting.
- Import them in Bambulab/Orca as single object with multiple parts.
- Assign each color to the same named part ("wall" is always withe to create a nice bright outline)
- The “Backbox” have an 4.5mm hole for the lights wire
- Use a PEI Textured plate for an optimal result
- Print White for last
To achieve a nice result be sure to have settings as follow
- first layer flow ratio = 1.05
- wall transitioning threshold angle = 50°
- Infill/wall overlap = 20%
- Avoid crossing walls
Once you have printed the model glue inside the backbox a ledstrip (multicolor or withe) and wire it trough the provided hole… you have your lightbox ready! ^_^
Take a look to my Patreon ----- https://www.patreon.com/Valda3DPrinting
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
