Phase 10 Deck Case
Remixed by
Copyright Claim
Phase 10 Deck Case
Remixed by
Boost
42
87
31
Print Profile(1)
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
Designer
4.7 h
2 plates
Boost
42
87
31
6
127
194
Released
Description
Phase 10 Deck Case remixed from the Uno Deck case. 2 Color. Requires 6 M3x30 screws. .16 layer heights looks good and 4 walls to help with strength.
Comment & Rating (31)
All
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
Came out amazing! Such a satisfying print! Hardware makes it feels more premium and I know it will last longer. Lettering on the front came out perfect with no issues as well thank you for remixing this!
It was a gift and they asked where I bought it 😅. I’ll be printing another because they told me they play with two decks!
Printed case on X1C and the hinges and card holder on the A1 Mini.
First layer to 40mm/s
Outer Walls at 60mm/s since I used Amolen Silk Shiny PLA for the case.
(Edited)
The designer has replied
0
Reply
great to hear!
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
Printed great . very happy
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
Fantastic design and print!!!
(Edited)
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
printed 2 of these, one with a flat bed and other textured, I think I like the textured best but both look great
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
Perfect addition to game night
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
printed perfectly
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
(Edited)
0
Reply
Do you know what size screws they would be equal to in US? I tried 6-32 x 1 1/4 inches - but they broke the hinges. There are no M3x30 in my hardware store
The designer has replied
0
Reply
No I don't.. you could add a negative part to the model in bambustudio and make the holes whatever size you need. I ordered the screws off amazon
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
good product.
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld