Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Marine Blue
At layer #6 (0.56mm) swap to Ash Gray
At layer #11 (0.96mm) swap to Ivory White for the rest.
Made with Hueforge Personal.