Sturdy Ratchet toothpaste tube Squeezer Remixed by ScrappyCoco

Remixed by

ScrappyCoco

Household>Other House Models

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Single colour (With Brim for Body)0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.9(86)

Dual colour profile 0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.8(94)

Single Colour 0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.7(43)

dual color adding A1 mini 2 plates PLA

1.5 h

2 plates

4.9(11)

Click to see more

Boost

234

505

282

1.2 k

1.8 k

Released

Description

I really loved the original model of this toothpaste squeezer but it kept on jamming.

I've made a few modifications and I think now works really well.

Thank you @Luke's 3D for the original design!

This is recommended to be printed in PETG with 0.2 layer height.

16/12/2023 Update

Removed the top overhang of the squeezer body. This will improve the print quality and aspect.

08/12/2023 Update

Removed the logo from the squeezer body.

29.07.2023 Update

I've made the body a little bit taller to fit better with the shaft.

04.02.2023 Update

I've added some more tolerance to the threaded shaft and nut and I've uploaded the new ones.

Comment & Rating (282)

@gamebae

Print Profile

Single colour (With Brim for Body)0.2mm layer, 2 walls, 15% infill

Printed well, but didn't work for me. Gears were not catching. Didn't change anything in the print setting.

The designer has replied

@ScrappyCoco

Have you watched the assembly video from the original print? https://www.printables.com/model/265248-ratchet-toothpaste-tube-squeezer

@gamebae

Replying to @ScrappyCoco :

I've printed one before on my old Creality and it worked fine. Not sure what went wrong here.

@ScrappyCoco

Replying to @gamebae :

Can you post some pictures so I can try to understand where is the issue?

@sawpod

Print Profile

Single colour (With Brim for Body)0.2mm layer, 2 walls, 15% infill

Printed in PLA single color and it works great.

@Tscherno

You assembled it wrong ;)

@sawpod

Yep realised and rectified my error. ;-)

@user_3992255154

The diameter of the nut was 1 mm to big, but now it works fine.

@user_348290967

I found the nut 3% to large I just scaled it down by 3%. it's really weird though I know I have printed this exact model before without an issue and I really thought it was the same role of petg Elegoo brand White but maybe it was a different roll I don't know. definitely the nut was too big this time. if I changed any settings between printings it wasn't intentional

@vollekannehosch

works great! I wish there is a version with a stand and another handle with more grip

The designer has replied

@ScrappyCoco

There are, you just have to look for! ;)

@harrispaul

works really well great design

@harrispaul

Used Bambu PETG

@martenh

Print Profile

Dual colour profile 0.2mm layer, 2 walls, 15% infill

Just a little bit of artifacts on the main body but does not affect function.

The designer has replied

@ScrappyCoco

I've made a modification and I eliminated the top overhang of the squeezer body now. The new body is the updated one on both profiles and also as a single stl. You can give it a try and reprint the body now. Thank you for your feedback!

(Edited)