King Kong - HueForge by miak3D

miak3D

Art>Signs & Logos

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 100% infill

3.8 h

1 plate

5.0(1)

Boost

Released

Description

This is a filament painting of King Kong. It was made by using Midjourney. Printed at 176x220 @ 1.84mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PrintBed Black

Printbed White

PrintBed Gray

PrintBed Baja Blue

PrintBed Midnight Blue

PrintBed Cosmic Purple

Swap Instructions:

Black until layer #5 at 0.48mm
Midnight Blue until layer #8 at 0.72mm
Grey until layer #9 at 0.8mm
Cosmic Purple until layer #11 at 0.96mm
Baja Blue until layer #13 at 1.12mm
White for the rest.

Comment & Rating (2)

@grecdel

Thanks for your model ! I used the same basic settings as you. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm I changed 2 transition so that it would work with only one AMS Black until layer #5 at 0.48mm Blue Grey until layer #9 at 0.80mm Grey until layer #11 at 0.96mm rest in white