LED Lichtring
dieser Lichtring, wurde für einen LED Streifen entworfen, der mit 3 AA Batterien betrieben wird. (Diesen gibt als 1 Meter es für 1,50 € bei Action in warmweiß)
Beim Zusammenbau sollte der LED Streifen durch die löcher geführt und eingeklebt werden. Der Ring Part A und B, nachdem der Diffusor zwischengesteckt wurde muss dann mit 2 Sekundenkleber an entsprechender Stelle zusammengeklebt werden.
Lediglich die Box benötigt Support. ansonsten alles normal mit 0.2 Layerhöhe drucken. PET / PLA / ABS egal. Alternativ kann der Diffusor auch mit TPU gedruckt werden. (muss aber nicht)
LED light ring
This light ring was designed for an LED strip that is operated with 3 AA batteries. (This is available as 1 meter for 1,50 € at Action in warm white)
When assembling, the LED strip should be guided through the holes and glued in. The ring part A and B, after the diffuser has been inserted, must then be glued together with 2 superglue at the appropriate point.
Only the box needs support. Otherwise print everything normally with 0.2 layer height. PET / PLA / ABS does not matter. Alternatively, the diffuser can also be printed with TPU. (but does not have to be)
Translated with DeepL.com (free version)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.