Valve cap dick
Remixed by
Copyright Claim
Valve cap dick
Remixed by
Boost
27
30
11
Print Profile(1)
0.15mm layer, 3 walls, 0% infill
Designer
37 min
1 plate
Boost
27
30
11
0
81
98
Released
Description
A little joke. The best is to printed in shiny color. Pink works the best.
The best to change it secretly, and wait for the reaction of the owner of the bike/car/motorbike etc.
It is remix of different model, which is too big and could be dangerous (damage valve).
Printing settings:
- material: ASA / PLA (if you don't need long life)
- layer height: 0.1-0.15
Comment & Rating (11)
All
Print Profile
0.15mm layer, 3 walls, 0% infill
great for pranking your mates.
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
I had a spaghetti failure on the second plate, but the others turned out fine, problem was bed adhesion. I used a glow in the dark PLA and have already mailed them to friends that wanted some.
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
funny..gave them away and never tested if they stayed on
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
nice looking funny items for prank
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.15mm layer, 3 walls, 0% infill
0
Reply
Related Models
© 2024 MakerWorld